Oil Spill Containment Accessories
ACME Hose Floats are produced by a urethane “sandwich” process, with a damage-resistant outer shell and a light, high-floatation closed cell foam inner section. Half sections are easily joined around the hose by means of a Quick Snap, gear-type stainless steel hose clamp. Only a screwdriver is required to tighten the clamp after snapping it into place. Unlike hollow plastic-type floats, ACME Hose Floats will maintain virtually full flotation capacities even though damaged almost to destruction.
|Hose Size||Inner Diam.||Outer Diam.||Length||Floating Capacity*|
|3″ Heavy Duty||3-5/8″||8″||12″||16.1#|
|4″ Heavy Duty||4-3/4″||10″||12″||23.0#|
|6″ Heavy Duty||6-3/4″||13″||12″||37.6#|
*Based on fresh water at 60° F