Hose Float – 3in

Specifications: ACME Hose Floats are produced by a urethane “sandwich” process, with a damage-resistant outer shell and a light, high-floatation closed cell foam inner section. Half sections are easily joined around the hose by means of a Quick Snap, gear-type stainless steel hose clamp. Only a screwdriver is required to tighten the clamp after snapping it into place. Unlike hollow plastic-type floats, ACME Hose Floats will maintain virtually full flotation capacities even though damaged almost to destruction.

Hose Size	Inner Diam.	Outer Diam.	Length	Floating Capacity*
1.5″ Standard	1-11/16″	6″	8″	6.3#
2″ Standard	2-3/16″	6″	8″	5.9#
2.5″ Standard	2-3/4″	7″	10″	10.4#
3″ Standard	3-1/4″	7″	10″	9.3#
3″ Heavy Duty	3-5/8″	8″	12″	16.1#
4″ Standard	4-1/4″	8″	12″	13.3#
4″ Heavy Duty	4-3/4″	10″	12″	23.0#
6″ Standard	6-1/4″	10″	12″	18.0#
6″ Heavy Duty	6-3/4″	13″	12″	37.6#
Cable Float	1-1/8″	8″	12″	19.2#

*Based on fresh water at 60° F