Specifications:
ACME Hose Floats are produced by a urethane “sandwich” process, with a damage-resistant outer shell and a light, high-floatation closed cell foam inner section. Half sections are easily joined around the hose by means of a Quick Snap, gear-type stainless steel hose clamp. Only a screwdriver is required to tighten the clamp after snapping it into place. Unlike hollow plastic-type floats, ACME Hose Floats will maintain virtually full flotation capacities even though damaged almost to destruction.
Hose Size | Inner Diam. | Outer Diam. | Length | Floating Capacity* |
1.5″ Standard | 1-11/16″ | 6″ | 8″ | 6.3# |
2″ Standard | 2-3/16″ | 6″ | 8″ | 5.9# |
2.5″ Standard | 2-3/4″ | 7″ | 10″ | 10.4# |
3″ Standard | 3-1/4″ | 7″ | 10″ | 9.3# |
3″ Heavy Duty | 3-5/8″ | 8″ | 12″ | 16.1# |
4″ Standard | 4-1/4″ | 8″ | 12″ | 13.3# |
4″ Heavy Duty | 4-3/4″ | 10″ | 12″ | 23.0# |
6″ Standard | 6-1/4″ | 10″ | 12″ | 18.0# |
6″ Heavy Duty | 6-3/4″ | 13″ | 12″ | 37.6# |
Cable Float | 1-1/8″ | 8″ | 12″ | 19.2# |
*Based on fresh water at 60° F